54C-0850

The Precision Quincy 54 series industrial process oven is a heavy-duty walk in oven that uses vertical up air flow.

Lab 54 Series

Description

With a maximum temperature of 500/650/850 F (see specs per model), the 54 Cabinet Series is great for aging, annealing, curing, dehydrating, drying, heat setting, heat shrinking, pre-heating, stress-relieving, and testing. Like all PQ ovens, the 54 Series is built to go above and beyond the industry standard for industrial ovens.

54 series industrial process ovens are available as Class “A” or Class “B”, almost any voltage, and with gas or electric heat. These cabinet ovens are of welded steel construction and quality components are used throughout. Ovens come with a limited warranty and are factory wired and tested before shipment.  Ovens meet or exceed NFPA-86, NFPA-70, OSHA & UL requirements. Depending on options, some dimensions and weights are approximate.

Also see our high-temp line of 54 series ovens

Specifications

Interior Width 38
Interior Depth 38
Interior Height 50
Max Temp (F) 850
Max Temp (C) 454
External Width 60
External Depth 81
External Height (Class A) 91
External Height (Class B) 77
Internal Volume 41.78
Airflow Full Vertical Up
Recirc Fan 2100
Recirc Motor 1
Electric Heat (Class A) 42
Electric Heat (Class B) 30
Fuel Heat 200,000
No of Swing Doors 1
Insulated Wall Thickness 5
Shipping Weight 2,800
Exhauster CFM 225 Elec / 550 Gas

Standard Features

  • Vertical air flow cabinet oven meets or exceeds NFPA-86, NFPA-70, OSHA & UL requirements
  • Factory wired, tested with temperature survey and balanced before shipment
  • Two shelves rated for 100# each
  • High volume air recirculation system
  • Welded steel construction
  • Minimal interior/exterior metal-to-metal contact
  • Painted enamel or Powdercoated exterior
  • Reinforced steel doors
  • Gasketed door openings
  • FM approved pressure release door latches
  • +/- 10f uniform temperature throughout oven standard
  • Adjustable louvered openings in duct work
  • Heavy duty blowers
  • Pre-wired NEMA 1 control cabinet with UL approved controls
  • Safety interlocks shut off heat if safety requirements are not ALL met
  • Digital indicating temperature controller
  • Solid state excess temperature controller
  • Heavy gauge temperature resistant aluminized steel interior and exterior
  • Oversized mineral wool insulation
  • Heavy duty, large diameter, Incoloy® sheathed low watt density heating elements OR, modulating burner for fuel heated units
  • Ball bearing heavy duty hinges
  • Adjustable shelf rails on 3″ centers
  • Main disconnect/breaker switch mounted in control panel
  • Class “A” Ovens only: Exhaust fan and purge timer where volatile, toxic or undesirable fumes are present

Optional Features

  • 304 stainless steel interior
  • Ramp-soak programmers
  • LFL monitor
  • Temperature recorder
  • Door window 12” x 12”
  • Extra Shelves rated for 100# or 250# each
  • Fresh air filter
  • Motorized dampers
  • NEMA 12 control panel
  • Mini Sentinel Control and Monitoring System (9 first-out alarm indicators,
    4 maintenance timers, built-in batch timer, control of exhaust &
    recirculation motors, optional auto dialer for problem notification)
  • Electric heated oven only SCR power control
PQ Ovens Think Outside the Box

Alternatives to Buying New Custom Equipment

Retrofits: 60% Average Savings vs New Equipment

Oven Questions? Contact PQ Ovens

Contact our experts about industrial oven repair and oven maintenance services or if you need oven replacement parts. We also do industrial oven installations!

We look forward to hearing from you, and building one of the best industrial ovens in the world for your business.

 

Just email us or send us a message (at right). Please allow for up to 48 business hours to receive a reply. You can also call our industrial oven repair and parts department any time at