The Precision Quincy X2 industrial process oven is a heavy duty high temperature cabinet oven with a space-saving design.

Lab X2 Series


With a maximum temperature of 350/500/650/850 F (see specs per model), the X2 Cabinet Series is great for aging, annealing, curing, dehydrating, drying, heat setting, heat shrinking, pre-heating, stress-relieving, and testing. Like all PQ ovens, the X2 Series is built to go above and beyond the industry standard for industrial ovens.

X2 industrial process ovens are available as Class “A” or Class “B”, almost any voltage, and with gas or electric heat. These cabinet ovens are of welded steel construction and quality components are used throughout. Ovens come with a limited warranty and are factory wired and tested before shipment.  Ovens meet or exceed NFPA-86, NFPA-70, OSHA & UL requirements. Depending on options, some dimensions and weights are approximate.

* Some series names and model numbers have changed. If you are looking for an old oven number, please contact us directly.
Also see our high-temp line of X2 ovens


Interior Width 26
Interior Depth 26
Interior Height 26
Max Temp (F) 500
Max Temp (C) 260
External Width 60
External Depth 42
External Height (Class A) 79
External Height (Class B) 65
Internal Volume 10.17
Airflow Full Horizontal
Recirc Fan 510
Recirc Motor 0.5
Electric Heat (Class A) 21
Electric Heat (Class B) 9
Fuel Heat 50,000
No of Swing Doors 1
Insulated Wall Thickness 5
Shipping Weight 1,000
Exhauster CFM 225 Elec / 550 Gas

Standard Features

  • Horizontal air flow cabinet oven meets or exceeds NFPA-86, NFPA-70, OSHA & UL requirements
  • Factory wired, tested with temperature survey and balanced before shipment
  • Two shelves rated for 100# each
  • High volume air recirculation system
  • Welded steel construction
  • Minimal interior/exterior metal-to-metal contact
  • Painted enamel or Powder coated exterior
  • Reinforced steel doors
  • Gasketed door openings
  • FM approved pressure release door latches
  • +/- 10f uniform temperature throughout oven standard
  • Adjustable louvered openings in duct work
  • Heavy duty blowers
  • Pre-wired NEMA 1 control cabinet with UL approved controls
  • Safety interlocks shut off heat if safety requirements are not ALL met
  • Digital indicating temperature controller
  • Solid state excess temperature controller
  • Heavy gauge temperature resistant aluminized steel interior and exterior
  • Oversized mineral wool insulation
  • Heavy duty, large diameter, Incoloy® sheathed low watt density heating elements OR, modulating burner for fuel heated units
  • Ball bearing heavy duty hinges
  • Adjustable shelf rails on 3″ centers
  • Main disconnect/breaker switch mounted in control panel
  • Class “A” Ovens only: Exhaust fan and purge timer where volatile, toxic or undesirable fumes are present

Optional Features

  • 304 stainless steel interior
  • Ramp-soak programmers
  • LFL monitor
  • Temperature recorder
  • Door window 12” x 12”
  • Extra Shelves rated for 100# or 250# each
  • Fresh air filter
  • Motorized dampers
  • NEMA 12 control panel
  • Mini Sentinel Control and Monitoring System (9 first-out alarm indicators,
    4 maintenance timers, built-in batch timer, control of exhaust &
    recirculation motors, optional auto dialer for problem notification)
  • Electric heated oven only
  • SCR power control